Small Slitting Machine For PVC Edge Band
The cutting width of the edge banding can be adjusted at will, and the slitting is dust-free and burr-free.
Reduce the waste of strips and completely solve the problem of matching thin plates and wide strips with the same color.
Equipment features of PVC edge banding slitting machine:
- Automation: The slitting machine is equipped with an automatic control system to realize a series of operations such as automatic unwinding, automatic slitting, and automatic rewinding
- High slitting accuracy: The knives and cutting devices of the slitting machine are precisely designed and manufactured to ensure that the width accuracy of the edge banding after slitting reaches a high standard, and the width error can usually be controlled within a small range.
- Strong applicability: It can be applied to the slitting of PVC edge bandings of different thicknesses and hardnesses, and can also be effectively slit for some special materials or surface-treated edge bandings.
- The slitting width can be adjusted at will according to needs to meet the diverse requirements of different sizes.
- Easy operation: The operation interface is simple and clear, and you can master the operation of the slitting machine after simple training.
Daily maintenance and care of PVC edge banding slitting machine
- Tool cleaning: Clean the slitting tool after each use or regularly (such as every two days). For round knives, you can use a special tool cleaning fluid and a soft cloth to gently wipe to remove PVC residues, oil stains, etc. on the knife surface. When cleaning straight knives, pay special attention to the blade part to prevent damage to the blade. The cleaned tool should be kept dry to avoid rust.
- Transmission parts cleaning: Clean the transmission parts such as belts, chains, and gears every once in a while (for example, one month). For places with oil stains, you can use an appropriate amount of detergent to wipe, but be careful to avoid detergent entering key components such as motors.
- Tool maintenance: Check the wear of the tool before each startup. If the blade is found to be notched, blunted or deformed, the tool should be replaced in time. In order to extend the service life of the tool and ensure the cutting effect, the tool can be lubricated regularly (such as every week).
- Gear maintenance: Check the wear of the gear to see if there is any problem such as tooth surface wear and tooth shape deformation. If the gear is found to be severely worn, it should be replaced in time.
- Electrical system maintenance: Regularly check electrical components such as motors, controllers, sensors, etc. Check the operation of the motor to see if there is abnormal heating, noise, etc.; check whether the buttons of the controller are sensitive and whether the display screen is displaying normally; whether the sensor can accurately detect the position and operation status of the edge banding. If the electrical components are found to be faulty, they should be replaced or repaired in time.
- Equipment calibration and debugging: Regularly calibrate the slitting accuracy of the slitting machine. Use a standard measuring tool to measure the width of the edge banding after slitting and compare it with the set width. If the slitting accuracy is found to be deviated, it is necessary to adjust the relevant parameters such as the position of the tool and the speed of the traction device.
